[V2!] Spool Wall Rack

Version 2 is now live! It's now even better looking, stronger, and easier to print!

Load up your favorite filament, hit print and enjoy!

Changelog for v2:

• Redid the entire model from the ground up
• Model is now flat & does not require supports at all.
• Super sturdy, can be printed as low as with 15% infill and still hold quite some weight.
• Reduced & moved the amount of screw mounting holes as it's not needed & to make it easier to print. The print supports the same size screws. (4mm thickness)
• Increased the spread of the dowels and increased the gap between the back dowel and the wall to increase spool size compatibility.

Recommended print settings for v2:

• PETG Filament.
• 15% Gyroid Infill.
• Brim or Mouse Ears Enabled.  (Recommended, but not necessary)
• No supports needed.
• 3 Wall loops.

Version 1 still works wonderful, I just wanted to make a updated version that matches my current CAD skills & style.

Filaments Used:

Version 1 - PETG | Prusament Galaxy Black PETG

Version 2 - PETG | Clas Ohlson White PETG (Generic)