Vancouver Canucks Skate Logo

A logo of the Canucks flying skate logo. Size can be adjusted and put up on the wall.

To resize, make sure you adjust only the x and y axis. Leave the Z axis at 100%. In order to print with the proper colors, print in the following order using “Pause at Height” (under Cura) or the “Pause Print” (Prusaslicer): white, black, red, yellow/gold. I modeled it with a 0.2mm layer height in mind:

Layer 1-3 = White

Layer 4-5 = Black

Layer 6-7 = Red

Layer 8-9 = Yellow/Gold

The red stripes for the logo should be printed at the same size as the main logo in red. Glue on the red stripes to the main logo using superglue.

The logo can be put up on a wall using poster/mounting putty.