MP-1 Rack: ZimaBoard 2U Rack Mount

ZimaBoard mount for the DAP Audio MP-1 2U modular racking system (part of the MP-1 Rack collection).
3h 27m
1× print file
0.30 mm
0.40 mm
66.00 g
29
193
1
3114
updated April 16, 2023

Description

PDF

Two segments module for the DAP Audio MP-1 10 segments 2U rack frame to mount a ZimaBoard and up to two 2.5" drive (max height: 9.5mm).

This module is part of a larger collection of modules known as the MP-1 Rack: 2U Modular 19" Racking System collection, which leverages the DAP Audio MP-1 frame to provide custom panel to mount multiple electronic devices such as a Raspberry Pi or some keystone modules. Each module in the collection should be compatible with others built by the community.

You can read more about why I built this collection in this article.

A free standing stand-alone version of this module is also available if you just want a simple stand for your ZimaBoard.

Assembly

You need unscrew and remove the lower plastic plate from your ZimaBoard and reuse the screw to mount it to the module as it has no mounting holes exposed.

Standard hard drive mounting screws can be used to attach your HDD / SDD in the drive slots. The ones coming from the official HDD bracket work perfectly here.

Printing

The model should be printed with the front section on the build-plate (see the 3mf file) and can be printed relatively quickly and cleanly using 0.3mm layer height in PETG or PLA (PLA might not be the best in warmer environment).

  • Raft: no
  • Supports: no
  • Layer Height: 0.3mm
  • Infill: 20%

Changelog

  • V1.0 (2022-06-20): Initial release
  • V1.0 (2023-04-16): Updated cover picture

Tags



Model origin

The author marked this model as their own original creation.

License