Printed this with Hatchbox Neon Green and black filaments. I did the print as two separate prints and it worked out ok. Printed the hex pattern with a skirt offset of 25mm and then swapped filaments after the print finished. Then I ran the second print with the normal 3mm skirt offset. The only suggestion I have for this is to rotate the model to the correct orientation in CAD and then export the stl so the parts land where they should in the slicer.
Printed this with Hatchbox Neon Green and black filaments. I did the print as two separate prints and it worked out ok. Printed the hex pattern with a skirt offset of 25mm and then swapped filaments after the print finished. Then I ran the second print with the normal 3mm skirt offset. The only suggestion I have for this is to rotate the model to the correct orientation in CAD and then export the stl so the parts land where they should in the slicer.