Prusa Mini MK3S Bear: Sherpa Mini + Revo Voron

Sherpa Mini extruder + E3D Revo Voron hotend (rigid mounted) for the Prusa Mini MK3S Bear Mod
34
137
0
2269
updated May 10, 2022

Description

PDF

Sherpa Mini extruder + E3D Revo Voron hotend (rigid mounted) for the Prusa Mini Bear Mod

I wanted to use E3D's Revo Micro with Prusa Mini Bear Mod in combination with Sherpa Mini extruder. I found the thread mount of Revo Micro to be fiddly and I did not really like it, so, as any sane person would do, I bought a Revo Voron heatsink :)) because of the rigid mount (and because it looks cool :D).

You need 6x M3x14 screws and 2 M3 hex nuts (in addition to what's needed for the Bear EXXA):
- 4 screws to hold the Revo Voron
- 2 screws & nuts to hold the Sherpa Mini

This mod is based on the BearEXXA extruder for the MK3S+ - thanks to the awesome Grégoire Saunier

Also huge thanks to pear3d.ch and Tomson for their work on the Prusa Mini MK3S Bear mod, they made all this possible.

It can be used on the MK3S+ as well, just print everything mirrored.

Model origin

The author remixed this model.

License