These two stl files allow you to print the back and front of a mount and fan shroud for your printer. You will probably have to redesign the back part a bit to fit you printer, which is why I have included the OpenSCAD source file.
It works fine, but my crappy V6 clone was worse than the stock hotend, so I reverted to that.
This mount takes one 40mm fan for the hotend radator, and two 4010 blower fans for cooling the part.
Let me know if you design the mouting part for your printer so that I can add it here. Thanks.
The author marked this model as their own original creation.