PS Vita Charging Dock Stand

I took the PS Vita Stand by LordLeXaT and cleaned up the front and added a different PS Vita logo, then cut out a…
37
272
4
1388
updated June 20, 2023

Description

PDF

I took the PS Vita Stand by LordLeXaT and cleaned up the front and added a different PS Vita logo, then cut out a 2-stage channel down the center and added a channel to run the cord. The bottom half of the hole is large enough for the USB tip to fit through, but only the top half will fit the Playstation end of the cord, so it will sit high enough up for the dock to make a connection.

I used a brim to guarantee flat corners but no other support was needed.

I've also posted a version with the logo recessed instead.

The source files from TinkerCad can be found here: https://www.tinkercad.com/things/8mmJPf2FI3b-vita-stand/editv2

Print Settings

Printer Brand:

FlashForge

Printer:

Creator Pro

Rafts:

No

Supports:

No

Resolution:

High

Infill:

20

Category: Video Games

Tags



Model origin

The author marked this model as their own original creation. Imported from Thingiverse.

License