Please see my updated design: https://www.prusaprinters.org/prints/103796-modular-monitor-standriser
A simple monitor stand/riser based on HespoHusky's design. I wanted something that would print better (arched slot) and I wanted to customize the sizes. Initially I also thought of going with a nice lattice design in the legs but figured out it takes longer to print and uses more filament than just using infill.
My design keeps it within the limits of a standard i3 bed: 200x200. I have however included a 200mm strut that prints diagonally across the bed.
The leg portion will provide 120mm of lift for your monitor. I am working on a version with adjustable heights.
The two struts included will provide you with either 130mm or 200m width between the two leg portions.
EDIT:
I have now included 3 leg heights: 120mm, 100mm and 80mm
I have also included two widths: 130mm and 200mm
Printer Brand:
Wanhao
Printer:
Wanhao Duplicator i3 V2
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20
Filament:
CCTREE PLA Black and Red
Notes:
Make sure you orientate the legs to print with the arch facing up - the slot opening must be against the bed.
Category: Computer
The author marked this model as their own original creation. Imported from Thingiverse.