Filament: PLA uDiadmond of Carbodeon Setting for the two: Quality 0.15mm, 210-215°c, bed temperature 60°c, filling 15%. For the second one I added a plate support. Fillet facing plate falling on the first one. Maybe by using temperature recommended by Carbodeon I should have been able to do without it. [Bed: 0 to 50°c, Nozzle 220 to 240°c]. I retrieve the box afterwards. Still learning. 3rd print. 3 screws 3.5×16. (3 seemed a bit loose to me, but better head fitting I guess)
Filament: PLA uDiadmond of Carbodeon
Setting for the two:
Quality 0.15mm, 210-215°c, bed temperature 60°c, filling 15%.
For the second one I added a plate support. Fillet facing plate falling on the first one.
Maybe by using temperature recommended by Carbodeon I should have been able to do without it. [Bed: 0 to 50°c, Nozzle 220 to 240°c]. I retrieve the box afterwards. Still learning. 3rd print.
3 screws 3.5×16. (3 seemed a bit loose to me, but better head fitting I guess)