@Rooter_2061393 Hmm.. its difficult to answer it.. (your setting, PETG HF/CF..., your flow - so many factors..) But yea, its good idea to try them with PETG! I would just get the 2.0 and 2.1 on one plate and print them! They are so small and you will see the difference in half a hour...
@eds_3d_shop Ill give that a try, its really not much wobble. They stay on but ill give it a try? I measured with calipers and they were definitely 14.5 and not 14.3. I just got the AMS. green PETG HF and grey PETG-CF would probably look good as well.
@Rooter_2061393 Hello! Thank you for the great feedback! They are so cute! :-) But.. they shouldn't wobble.. Maybe you should print the v.2.0 with PETG for your AMS? Or you could check the newest versions here: https://makerworld.com/en/@eds_3d_shop
Turned out great, haven't tried any abrasives yet but now I'm not so scared. They have a tiny wobble but they seem on securely. Button surface is the biqu cryogrip pro plate, its red and black bbl pla.