Hydrophonic Tower - 20L Module/Lid Adapter - Screw toghether Version
printed perfectly with Voxel PETG+ and Overture PETG.
Very pleased with the fit and finish.
Printed each half on different MK4 with input shaping and 0.6mm nozzle.
Was a little worried about thread resolution so I used variable layer height to print the top threads at 0.15mm and 0.25mm for the base. For the nut, I just went with 0.20mm for the whole thing.
printed perfectly with Voxel PETG+ and Overture PETG.
Very pleased with the fit and finish.
Printed each half on different MK4 with input shaping and 0.6mm nozzle.
Was a little worried about thread resolution so I used variable layer height to print the top threads at 0.15mm and 0.25mm for the base. For the nut, I just went with 0.20mm for the whole thing.
Threads were very smooth!
Exactly what I needed. (edited)