It is not pretty, but it works well. It clips onto the cooling block and is then fastened with screws. I attached a tiny PCB with a 24v to 12v step-down converter to run the silent Noctua fan. Two 24v blower fans do the part cooling.
This design does not compromise cooling performance while allowing an unobstructed view of the nozzle and part.
In my case, the KP3S metal printhead mount is not perfectly square. So it took some squeezing and tweaking to make things fit. Please keep that in mind when giving this a try.
L'autore ha contrassegnato questo modello come una sua creazione originale.