A cable chain to keep the heat bed cable from dragging along the base of he printer. Should help with the thermistor going haywire.
Notes:
ORIGINAL version. Thick. Does not fit with a back mounted parts cooling fan! The shroud “parks” on top of the heat bed clasp.
NARROW version. Smaller and less parts. Works with a back mounted fan.
MINIMAL version just print Start piece +1 or 2 chain links.
[Original version] Parts needed:
19x Chain
19x Chain cover
2x M4 nuts to attach to the heat bed's existing screws.
1x zip tie to secure the cable in the small holes (like the original one have).
[NARROW version]:
1x Start piece narrow
1x Heat bed clasp narrow
19x Narrow chain. Print a few extra just in case some have bad connection to each other, or you want a slightly longer chain.
2x M4 nuts to attach to the heat bed's existing screws.
1x zip tie to secure the cable in the small holes (like the original one have).
[MINIMAL version]:
1x start piece
1-2 chain links.
2023-01-29: New narrow + Minimal version.
2023-01-27: Initial version.
Original Chain parts remixed from: https://www.thingiverse.com/thing:2920060
Narrow chain parts remixed from: https://www.thingiverse.com/thing:3769941
L'autore ha contrassegnato questo modello come una sua creazione originale.