J3 Piper Cub Float Plane

J3 Piper Cub Float Plane.  Intended to be printed for HO scale modeling.

Intended for Resin printing. Printed on an Anycubic Mono 2K and also on Anycubic M5s

Enhance your scale model railroad or diorama.  Some resizing is required before printing.

For HO scale: This model Wingspan should be 4.86" (123.44mm), Length 3.09" (78.486mm), Height 0.91" (23.114mm).  Use same scaling % on Float assembly.

Supports are required and post clean up is necessary.  Wing and float support rods are delicate, use caution removing supports. You may opt to make these separately out of other materials if having issues printing. The X-support rods on the Float are not printed. I used small gauge music wire. The float paddles may not print well, but you can make these out of thin cardboard or plastic and attach. The antlers are not printed, these are separate art. Angled print is required to control warping. The plane decals are custom art that I created and printed on clear scale model decal paper.