Meta Quest 3 Controller Grips / Straps

Battery covers for the Quest 3 controllers with a loop to use the stock wristbands as controller grips / straps.
66
380
4
4018
mis à jour 26 octobre 2023

Description

PDF

First (and working) draft of battery covers for the Quest 3 controllers with a loop to use the stock wristbands as controller grips. Like a cheap version of the official “Active Straps”.

These were created really quick using tinkercad.com and a 3D-Scan of the controller by user Chri on thingiverse, so I'll stick with the CC BY-NC licence.

Duplicate and mirror the model in your slicer to get left and right version.

I printed those in PETG. I don't think PLA would work because there are some rather delicate parts that I imagine would break easily when printed in PLA :/

Also, while it's a pretty fast print even with tree supports (~1h per grip), it took me nearly another hour per controller to remove the supports and sand/file down the parts so it would  fit and snap in the little triangle holder button of the controller. See photo with red circles to understand what I mean, that little hole is hard to get right and very important for the covers to stay on the controllers.

First/cover photo and the one with my hand show the way I fastened the bands to the loop,, with a simple knot. You can see what else I tried on some other photos but that didn't work for me.

I printed it in “GIANTARM PETG ab-white” and the color doesn't really match the controller. Still looks okay imho.

I used a resolution of 0.16mm and tree supports because I find them easier to remove, no brim.

Origine du modèle

L'auteur a remixé ce modèle.

Meta Quest 3 left Controller 3D Scan
par Chri (thingiverse.com)
 

Différences du remix par rapport à l'original

Added a loop to the controller cover.

Licence


Modèles en vedette du créateur

Voir plus