Hueforge - Dream Catcher

Hueforge Print
50
103
1
1277
mis à jour 2 juillet 2023

Description

PDF

Hueforge generated file printed on Bambu Lab X1C. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.

Filaments Used:
PLA ENVLAS Black Transmission Distance: 0.3
PLA ENVLAS Yellow Transmission Distance: 5
PLA ENVLAS Yellow Transmission Distance: 5
PLA ENVLAS Red Transmission Distance: 1.5
PLA ENVLAS Yellow Transmission Distance: 5
PLA ENVLAS Grey Transmission Distance: 2
PLA ENVLAS BL/GRN/RED Transmission Distance: 1.5
PLA ENVLAS Yellow Transmission Distance: 5
PLA ENVLAS Marble Transmission Distance: 5

Swap Instructions:
Black until layer #5 at 0.48mm
Yellow until layer #6 at 0.56mm
Yellow until layer #7 at 0.64mm
Red until layer #8 at 0.72mm
Yellow until layer #9 at 0.8mm
Grey until layer #11 at 0.96mm
BL/GRN/RED(tricolor) until layer #14 at 1.2mm
Yellow until layer #16 at 1.36mm
Marble for the rest.

Origine du modèle

L'auteur a marqué ce modèle comme sa propre création originale.

Licence


Modèles en vedette du créateur

Voir plus