This remix is a mashup of @Popandsicle's excellent BOTW Master Sword Hilt and @xenonjibei's TOTK Corrupted Blade! All credit for the designs goes to each of them.
If you have already printed @Popandsicle's Master Sword then you should be able to just print the corrupted blade and another “Blade Joiner” and swap the two blades as desired!
I highly recommend printing the blade with a brim to improve bed adhesion. I have uploaded a whole model (~315mm tall) and also a .3mf of a cut model with pins that was created using PrusaSlicer 2.6.0 Beta 2. I've never used that feature before so you may have to cut the model yourself if the one I uploaded doesn't work for your printer.
Using Meshmixer and PrusaSlicer 2.6.0 Beta2 I took @xenonjibei's blade model, resized it and merged the bottom with @Popandsicle's “Blade Piece 2” to make the corrupted blade compatible with their hilt design.
I am only including the remixed corrupted blade, for the assembly instructions and hilt pieces including the required “Blade Joiner” please download them from @Popandsicle's original page:
For photos of some excellent makes and paint jobs of the corrupted blade go check out @xenonjibei's original page where they also included a stand for the corrupted Maser Sword:
The Legend of Zelda: Tears of the Kingdom MasterSword by xenonjibei - Thingiverse
02-June-23 Update: After printing it I noticed that I had not extended the internal hole far enough, so when assembled with the other pieces it would leave about a 1mm gap between the “Blade Anchor” and this Corrupted Blade. The new models have fixed this. If you have already printed the old model then this can also be fixed by cutting the “Blade Joiner” a little shorter. I've also adjusted where the 2-piece .3mf was cut.
L'auteur a remixé ce modèle.