Bambu Lab X1C - Top glass riser / mount with vents and magnet support

Bambu Lab X1C - Top glass riser / mount with vents and magnet support
24
111
2
2426
mis à jour 15 janvier 2024

Description

PDF

***** New and improved Version 2 (LED track, new connectors, hinge for glass) can be found here. *****

 

I wanted a base / riser for the top glass that has some vents in it and is strong enough to hold the AMS system when seated on top and has some magnets to hold it in place when opening the glass.

I copied the sketch profile from here and after drawing the glass shape in Fusion 360, I created this design.

I made 7 holes for double magnet 10x3mm total 14 magnets to make it solid enough thru the X1C glass padding on top.

In the design I created 1 layer before the hole for the magnets since I wanted to insert the magnets while printing and have them embedded inside the structure. You can modify and remove this layer or just slice it with -0.2mm Z offset if you do not want to do that.

I printed it with 0.2mm layer height, 3 walls and 10% infill. I added a pause at layer 31, inserted the magnets and continued printing.

If you like my design, I would appreciate it if you buy me coffee.

Tags



Origine du modèle

L'auteur a marqué ce modèle comme sa propre création originale.

Licence