ToroSpin TURBO
New version of ToroSpin with double planetary gearbox with smooth move and without bearings. Awesome Gear ratio 1:12!
Dans le concours Faites-le voler
1 063
2419
56
14 k
mis à jour 23 janvier 2024
Description
PDFBasic info:
- Toroidal propeller launcher with double planetary gearbox.
Gearbox:
- Non-printable parts: You just need one type of screw for assembly.
- Gear ratio 1:12 with smooth move.
Printing:
- No supports!
- Layers height are 0,15-0,2mm.
- Recommended material for gears is PETG, see below to BOM.
BOM:
| Printed parts/Purchased parts | |||
|---|---|---|---|
| Item | File | Qty | Description |
| 1 | 1.stl | 8 | PETG |
| 2 | 2.stl | 1 | PETG |
| 3 | 3-Ring-up.stl | 1 | PETG |
| 4 | 4-Ring-down.stl | 1 | PETG |
| 5 | 5.stl | 1 | PETG |
| 6 | 6.stl | 1 | PETG |
| 7 | 7.stl | 1 | PETG |
| 8 | 8.stl | 1 | PLA |
| 9 | 9.stl | 1 | PETG |
| 10 | 10.stl | 1 | PLA |
| 11 | 11.stl | 1 | PLA |
| 12 | 12.stl | 1 | PETG |
| 13 | 13.stl, 13Low.stl | 1 | PETG (1) |
| 14 | 14.stl | 1 | PETG |
| 15 | Tor_170.stl, Tor_200.stl | 1 | Propeller (2) |
| - | Tor_base.step | - | to create remixes |
| 16 | Screw M3x16 | 11 | Countersunk screw (DIN 7991) |
- 13Low.stl is for printer bed size under 250x210mm.
- 170mm or 200mm toroidal propeller.
Assembly:
STEP 1:
Note: Screw (red) in detail A shouldn't be too tight!
STEP 2:
STEP 3:
STEP 4:
STEP 5: Let's fly!!
Note: By downloading and using the model, you agree that it is provided "as is," without any warranties. The authors of this model are not liable for any accidents, damages, or other issues that may arise from its use. Users are encouraged to exercise caution and use the model responsibly. The author disclaims any responsibility for any losses or damages incurred through the use of this product.
Tags
Origine du modèle
L'auteur a marqué ce modèle comme sa propre création originale.
