Update of 1mm version:
For a better looking print added more thickness (material) at the top of the head inside the 1mm version. There was too large radius at the top of the head and the layers were harder to connect to each other.
.gcode files are for Prusa Mini, PLA filament.
You can print it instantly from the included .gcode files or customize your own print. In the attached .3mf file (1mm thickness) the seam is painted in the back of the figure to not affect the appearance and at the same time to be as less visible as possible.
The second .3mf file (full) is set to print without perimeters and layers. There is only gyroid infill at 30%. Again, you can edit as you like.
Added also 1mm thickness in 30% gyroid version with the first two bottom layers filled.
L'auteur a marqué ce modèle comme sa propre création originale.