If you wish to hang your MacBook or any other laptop on the wall with the help of Ikea Skadis system like me, then this is the must-have accessory.
This bracket helps you to hang a laptop onto your Ikea Skadis board, with no waggling in it.
If you have a 14-inch MacBook Pro (2021) (15.5mm height) then you can use it directly. The inner distance for this version is 16mm, so it will be a perfect fit for a 14-inch MacBook Pro. If you have any other laptop you want to hang, you can:
Using two of it is enough, but if you want to have maximum security, use 3.
.stl, .3mf and .step files are uploaded. Any remix is welcome.
Printer Brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
50%
Filament: Real PLA Purple
Notes:
Use any material you like, PLA/ABS/PETG should all work. make sure you have infill set to 50% or more if you don't want your laptop fall down accidentally.
Support is needed, but only on build plate.
L'auteur a marqué ce modèle comme sa propre création originale. Importé de Thingiverse.