Skadis Holder: Pinecil/TS100 Soldering Iron Tips (uses heat set inserts)

Ikea Skadis holder for Pinecil or TS100 type soldering iron tips, using heat-set inserts and printed hooks for mounting
10h 34m
1× fichier d'impression
0.20 mm
0.40 mm
125.00 g
28
72
2
1458
mis à jour 2 octobre 2022

Description

PDF

Simple Skadis holder for eight Pinecil or TS100 type soldering iron tips with bonus top pocket and tiny right-side oval slot for a bit of additional storage.

Nice companion for mounting above the Skadis Pinecil holder/soldering station: https://www.printables.com/model/287837

This model requires M2.5 heat-set inserts, M2.5 screws, and printed hooks.

Required Parts

Printing Notes

For printing any heat-set insert project on a FFF/FDM printer its a good idea to use 4+ perimeters to make sure that there's enough surface for the inserts to bite into.

My test and final prints were done on a stock Prusa MINI+ with Prusament PETG. PLA and other materials should work fine though.

Tags



Origine du modèle

L'auteur a remixé ce modèle.

Licence