Nerf HammerCannon Neo (HC-Neo)

Update log: 

29/10/2024 - Public open beta

Assembly guide:
https://docs.google.com/document/d/1AA8QjToOUXzgXjq4r-FesoXH2aZGSZo0GmJnRaRh7Tg/edit?usp=sharing

The HC Neo is a top slide primed, mag-fed, custom pistol blaster, using Worker nightingale slim angled talons and exclusively 13x36mm short darts, a design reminiscent of blasters such as the Zinc by 118 Designs.

Information in the assembly guide will be updated over time when flaws are found.

Plunger volume: 99.3cc, 90mm draw length

Full list of modifications from the Original version:

• Turnaround modified to maximise airflow (T-pull removed to compensate)
• More plunger draw for more volume potential
• skinny pusher 
• Smoothened-out edges for better handling
• Improved spring rest 
• fully sealed plunger design
• jam port to relieve dart jams 

Designer's comments:
The HC-Neo is just my attempt to fix any mistakes I made while designing in Tinkercad using Onshape. While I'm proud of it, there is an inherent design issue with the blaster's turnaround design, which conflicts with the use of Nightingale slim angled talon magazines that make it unable to be optimised. Furthermore, the design has deviated far from the intended large-a** hand cannon. It's too small to be a proper large hand cannon and too big to be a compact pistol. I'm sure some people love the design but this project was more of a learning moment than a good blaster design. The lessons learnt here will be applied to future designs. That being said no hardware kits will be produced. This file release is more focused on providing new designers with somewhere to learn from. You're still welcome to try and get hardware and print the blaster yourself! Thank you for the support for this project if you were here from the start! 

More volume, smoothened corners, and a couple of other improvements 

T-pull function abandoned for better airflow in turnaround