My small human was given a bunch of rattles which are all unwieldy and too big for her hands, so I wanted something she could grip and roll around and shake etc. Print as many coins as you feel as necessary, I've put about 12 in.
Coins are larger than the holes in the cage so no worry about them coming out. The lid is able to be done up tight, but use your own judgement as to whether this is appropriate. The gaps in the cage are all filleted so there's no sharp corners for little fingers.
Printed at 0.2mm, 10% adaptive cubic in PLA, but most setting should work fine.
El autor ha marcado este modelo como su creación original.