VKB STECS STEM Module JPEIN Mount v1.0

VKB STECS STEM Module JPEIN Mount v1.0
Created by John5
CC BY-NC-SA 4.0

Assorted mounts for affixing the STEM module to a JPEIN style extrusion mount to reduce STECS throttle footprint, allowing for more compact mounting. Uses the hardware included with the STEM module. NO ADDITIONAL HARDWARE REQUIRED. 

Offset and centered variations included for preferred mounting arrangement. Variations could be created upon request. 

Print oriented ‘face down’, with the lettering facing upward. A brim is suggested to prevent warping. Print with >5 perimeters and >25% infill for strength. Cubic infill suggested. No supports are required.