Do you or your kids like to play Pokemon? Are you tired of having damage counters cluttering up your gaming surface and getting lost all over the floor? Then download and print this Pokemon damage counting dial. This dial counts in increments of 10, from 0 to 190. You can choose to count damage up or down.
There are three choices of lids: Pokemon logo, generic damage counter, and blank to allow personalization.
Assembly Instructions:
Print all three pieces. Place the dial in the bottom case. Place superglue on the raised edges of the bottom case and on the button in the middle of the dial. Place lid on bottom of the case. Be careful not to put glue on the dial during assembly.
Printing Instructions:
Print at .15 layer height for correct tolerances to allow the wheel to spin inside the dial.
Easy print. No supports necessary.
Pokemon logo courtesy of:
https://www.freepnglogos.com/pics/pokemon-logo-png
El autor no ha proporcionado todavía el origen del modelo.