It's very simple. The height of the ball is 10 cm, width 6.3 cm and thickness 0.18 cm. Before printing, see the printing instructions. The model can be proportionally changed or enlarged.
Printing instructions
The orientation of the printout when printing should be placed on the mat with the flat side. It is designed for printing without supports. We print with a layer height of 0.2 and a nozzle of 0.4 and with 100% fill and 2 perimeter. I used white filament in the picture. After printing, fold and glue.
El autor ha marcado este modelo como su creación original.