Gallium Computer Frame (for BigClive.com project)

This is a frame for a 6x4 Gallium circuit that was designed by BigClive.com

The circuit is available from his site for free (along with an even bigger one), and can be downloaded and easily sent for manufacture at a pcb manufacturing facility - then you can buy the components and solder them in place.

I needed a stand for mine, so modified the original model to suit my needs (thanks to original designer).

https://www.thingiverse.com/thing:2001961

I mounted my board with hot glue, and there is a cable tie hole at the rear for cable management/strain relief.

Print Settings

Supports:

Yes

Filament:

Generic PLA

Notes:

I printed this initially in black, then pausing at layer 85 to swap to white PLA, then pausing again at layer 98 to swap back to black PLA. This allowed the keys to be white while most of the frame is black. If you wanted to cover up the white strip at the base of the frame you, could do so with a marker pen or paint.

I used tree supports in Cura, and they worked well.

Category: Gadgets