Bracket for KSGER Soldering Station

I wanted to mount my KSGER 2.1 Soldering Station (with aluminum case, 87.5mm wide, 38mm tall (42mm w/rubber feet) out…
17
60
2
484
actualizado 26 de enero de 2024

Descripción

PDF

I wanted to mount my KSGER 2.1 Soldering Station (with aluminum case, 87.5mm wide, 38mm tall (42mm w/rubber feet) out of the way to free up space so I designed these brackets to clamp the station to the side of my workbench hutch.

Note, the opening height of the bracket (42mm) requires the rubber feet to still be on the station for the station to be clamped securely.

Updated 03/06/2021: Added v2 of the bracket with a different font for 'KSGER'. I also added a bracket that allows you to use up to four of the T12 tip holders I designed (one "Bottom" style and up to 3 "top" style) to keep your favorite soldering tips close to the soldering station. The 3rd photo shows this with just 2 tip holders inserted; 1 “Bottom” and 1 “Top”. Note: Do not print the T12 Tip holder bracket if you don't plan to use the tip holders -- the bracket will not clamp the station securely without them.

Print Settings

Rafts:

Doesn't Matter

Supports: 

No

Resolution:

0.16

Infill: 

50%

Filament: Hatchbox 1.75mm PLA Blue

Category: Tool Holders & Boxes

Etiquetas



Origen del modelo

El autor ha marcado este modelo como su creación original. Importado de Thingiverse.

Licencia