RPLIDAR A1-M8 case, suitable for all hardware versions.
Using the upper or lower top closure depending on the length of the motor axis of your lidar, depends on the hardware version (R1, R2, R3), the difference between the two parts is that the high version lifts the closure by 2 mm to avoid contact with the motor axis.
Print Settings:
Printer: MK3S+
Rafts: Doesn't Matter
Supports: Doesn't Matter
Resolution: 0.2 mm
Infill: 15%
Filament brand: Prusa
Filament color: White
Filament material: PLA or PETG
The author marked this model as their own original creation.