GRAVITRAX height stone 10 mm with 14 mm diameter hole

GRAVITRAX; Wanted to drop the ball through the plate but the height stones are in the way? Now just drop the ball through the height stones, just print your own!

GRAVITRAX Standard height stone 10 mm with 14 mm diameter hole in middle (v.20211121.r00)

Print includes two parts: Height Stone and Footplate; Footplate clicks in the bottom of the stone. You do need some force to click it in, that is intended that way (use other height stone to tap footplate in place). Tested, fitted and used with my own Gravitrax sets

Notes:

1. The block to roll the ball out is separate download
2. Also available in download gcode and stl file to print 4 pieces at once

More to come, if you like it and you are rich enough then Paypal Me, else just enjoy!

G-code details:

• Printer: Prusa MK3/S/S+
• Material: PLA (1.75mm); 9 gr.; 3.60 m
• Print settings:
  • Nozzle 0.4 mm
  • Extruder 210 C°
  • Heated bed 60 C°
  • Layer 0.15 mm
  • Infill: Grid 20%
  • Adhesion: Skirt
• Print time (est.): 1 hr. 16 min.
• Software: Cura v.4.12.0
• Stl file: exported from dwg

G-code details ( 4 pieces):

• Printer: Prusa MK3/S/S+
• Material: PLA (1.75mm); 37 gr.; 14.24 m
• Print settings:
  • Nozzle 0.4 mm
  • Extruder 210 C°
  • Heated bed 60 C°
  • Layer 0.15 mm
  • Infill: Grid 20%
  • Adhesion: Skirt
• Print time (est.): 5 hr. 6 min.
• Software: Cura v.4.12.0
• Stl file: exported from dwg