Dillon XL-650 Index Bearing Cam

Upgrade Index Cam on the XL-650 to get a reduced wear, lower friction and a smoother reloading.
10
144
1
922
updated October 18, 2021

Description

PDF

Replacing the steel Index Cam on the XL-650 with this Index Bearing Cam, you get a reduced wear, lower friction and a smoother reloading. It is much easier to feel whats going on, when reloading.

To assemble, you will need:

  • 1x 626zz bearing (19 x 6 x 6 mm).
  • 1x Flat head M6 screw, 18-20mm in length.
  • 1x Washer M6.
  • 1x M6 nyloc nut. Se photos for assembly instructions.

Update July 3. 2018:
Split the model into two, one for the old Dillon model with steel shell plate (photos) and one for the newer model with boss and cast shell plate.
Look for “New” and “Old” in filename.

Model shown in Super Blue Devil Design PET for the old Dillon XL-650.

>> If you like it, please leave a like, rating or a tip... :)

Print Settings

  • 0.20mm layer height, 30% infill
  • 3 perimeters, 5 top and 4 bottom layers
  • No support or elephant foot compensation needed

Tags



Model origin

The author marked this model as their own original creation. Imported from Thingiverse.

License


Highlighted models from creator

View more