Twisty Vases

A few vases created while learning Fusion 360 form modeling. Each vase is provided as a normal, hollow print and as a solid for “vase mode” printing. Scale to suite your needs.

Vase mode tips for MK3S 0.4mm nozzle:

1. Start with Prusaslicer 0.30mm DRAFT preset
2. Change layer height to 0.25mm
3. Enable vase mode in the perimeters section
4. PETG - Increase extrusion multiplier to 1.2 in the filament settings
5. Disable the flow rate override in the printer's custom “Start G-code” with a ‘;’ :
   “; M221 S{if layer_height<0.075}100{else}95{endif}”
6. DO NOT change speeds or cooling thresholds (it needs a lot of cooling)
7. (optional) Scale model to 200%