Robust Finger Skateboard Toy No Glue :)

Check out the new V2 too :)

https://www.printables.com/model/692209-robust-finger-skateboard-v2-durable-rollable-fully/files

Board 1: WIth Chamfer
Board 2: With radius

Printing Instructions:

Print the axis massive with as many perimeter as possible & 100% infill.

Use some supports on the board itself

Set the seam at random position for the axis bearing :)

I printed a finger Board from thingiverse because my son loves these boards.

But due to the contstruction the wheels borke like 10 minutes after I gave the board to my children :(

So i designed a new skateboard which is ment to last at least some weeks :D

You will not need any glue due to slim tolerances.

I cut of the seams at the axis inserts to avoid their unevenness.

Tipp: Assemble the Wheels with a vice!

Have fun printin, assembling and playinPS: If you have Problems with tight tolerances try to Print all parts but the Axis in 101% . You can divide parts and scale them Up in your slicer! But then you might have to glue the wheels to the Axis later. :D!