CAddy - The Super Glue Tray

It always seems like the bottle of CA that I have on hand isn't the one I need for what I'm doing. I decided I needed a fun tray for holding my bottles of super glue in different consistencies.

I decided to design it around an ethyl cyanoacrylate molecular diagram. That left me with some extra space so I included additional organizational features.

• A slot in the front sized to hold a few popsicle sticks
• The oxygen atom at the 4 position will hold an acupuncture needle (for clearing clogs).
• The other oxygen atom is a hole that can hold a sharpie, a small rolled up rag (pictured), or maybe some rolled up sandpaper.
• The triple bond holds a utility knife.

Bottle holes are ellipses measuring 50mm x 30mm. I designed them specifically with 50g bottles of Hobby King CA in mind.

I included STLs for versions of the tray with and without label text.

blog post

Print instructions

Tray:

• Layer Height: 0.2mm
• Infill: 10%
• Nozzle Diameter: 0.4mm
• Supports/Rafts/Brims: No

Utility Knife Handle:

• Layer Height: 0.15mm
• Infill: 15%
• Nozzle Diameter: 0.4mm
• Supports/Rafts/Brims: No

Hardware Required (for the knife handle):

• 1 utility blade
• 2 hex head machines screws - m3x10 or m3x12

Assembly:

• See the numbered picture for assembly of the utility knife.
• The knife stores blade down in the CAddy tray. There is a backstop to prevent the blade from hitting bottom.

Filaments Pictured:

• Prusament PLA in Galaxy Purple
• Printed Solid Jesse PLA in Feta Green