MKS Robin Mini To SKR 1.3 or 1.4 adapter (not just for) Kingroon KP3

An adapter to replace your MKS Robin Mini with an SKR 1.3 or similar board
3
27
0
760
updated January 19, 2022

Description

PDF

Since the extruder stepper motor driver has died on my MKS Robin Mini, I decided to swap it for an SKR 1.3, which I had at home. I made this adapter, so the microSD card slot is at the same place as on the Robin. Luckily, the USB port also lined up.

I made a special version for the Kingroon KP3 printer, where the mounting tabs of the electronics cover would be in place.

Assembly instructions: all nuts are regular M3 nuts, and are press fit. Secure the SKR board to the adapter with M3x8 screws with a washer underneath. Then (at least in the case of the KP3) secure the adapter to the baseplate with M3x12 screws.

Printed mine from Devil Design PETG Black

As far as my experience goes, should be compatible with the SKR 1.3, SKR 1.4 and MKS Gen L boards, maybe even more.

 

 

 

 

Tags



Model origin

The author marked this model as their own original creation. Imported from Thingiverse.

License