GB: Wedge for ender 3 Max Neo filament sensor for RedRex Extruder / FR: Cale pour capteur de fin de filament d'ender 3 Max Neo pour extrudeur RedRex

♥ Like, share and post your fabrication ♥ Aime, partage et poste ta fabrication ♥
22m
1× print file
0.40 mm
0.60 mm
11.00 g
7
74
1
992
updated April 11, 2023

Description

PDF

🇬🇧 : 

When I changed my original "crappy" extruder for a RedRex much more adapted to a proper printer (I'm not saying it's a good printer BUT! That it is "less worse" this way).

So I needed to upgrade the filament sensor to be up to par. There was a model available on Cults with 44 000 errors... (Yeah, on a 4x4x1cm plate...) So here is a gift ;)

Link to RedRex on amazon: https://www.amazon.fr/dp/B09ZDQM6P6?ref=ppx_yo2ov_dt_b_product_details&th=1

  • You will need a bigger screw than the original one because it is too short. I use M3x30 but it's a bit too long
  • Without supports, flat... Yes, I specify... You never know!
  • No need for a raft
  • Can be printed in PLA
  • Filling as you want !
  • Prints in 20 minutes not even...
  • Need a tuto to install it ? Look at the picture.

 

 🇫🇷 : 

Lorsque j'ai changé mon extrudeur “à chier” d'origine par un RedRex bien plus adapté à une imprimante digne de ce nom. (Je ne dis pas que c'est une bonne imprimante MAIS ! Qu'elle est "moins pire" comme cela). 

J'ai donc eut besoin de rehausser le capteur de filament pour être à la hauteur. Il y avait un modèle disponible sur Cults avec 44 000 erreurs… (Ouais quand même sur une plaquette de 4x4x1cm…) Donc voila cadeau ;)

Lien du RedRex sur amazon: https://www.amazon.fr/dp/B09ZDQM6P6?ref=ppx_yo2ov_dt_b_product_details&th=1

  • Vous aurez besoin de vis plus grande que celle d'origine car trop courte. J'utilise des M3x30 mais c'est un peu trop long.
  • Sans supports, à plat… Oui, je précise… On ne sait jamais !
  • Pas besoin de raft
  • S'imprime en PLA
  • Remplissage comme tu veux !
  • S'imprime en 20 minutes même pas…
  • Besoin d'un tuto pour l'installer ? Regarde la photo.

Tags



Model origin

The author marked this model as their own original creation.

License