Weird Twisty Vase

A wild hair of an idea turned reality!
102
749
3
3022
updated January 17, 2023

Description

PDF

A wild hair of an idea turned reality! I had the thought to create a vase like shape made up of a bunch of twisted segments. A couple of iterations later, and voila! Weird Vase is complete. :)

 

Print instructions

 

Print Settings

Printer Brand: FlashForge

Printer: Finder

Rafts: No

Supports: No

Resolution: .2

Infill: 40%+

Filament: addNorth PLA Granite
Notes:

Perimeters: 2 or 3

Infill: 40%+ works well with 2 perimeters, 3 perimeters can be anything

Cooling should be cranked up as HIGH as possible

Print this SLOW. WAY slower than you probably think it needs to be. There must be sufficient time for the fan to completely cool the intense overhang at the bottom of the print. I printed at a whopping 10/mm a second, but you may be able to print faster if your printer has better cooling than mine. Be prepared to make some tweaks and restart the print; I recommend keeping a close eye on the first hour of the print.

I successfully printed this scaled down to 80%, but it can potentially be printed even smaller if printed slow enough. Larger shouldn't be an issue.

Tags



Model origin

The author marked this model as their own original creation. Imported from Thingiverse.

License