No hand door upgrade

With this upgrade, you can turn any household door into a minimal touch door.

Print instructions

I drew inspiration from previous prints in the competition but added my own touch to it. Haha, get it? Well, moving on, this print can be printed four at a time on the Prusa MK3s with ease. With some slicing and assembly, you can print the model on the SL1, although I don't recommend it as resin is less flexible than plastic. The larger T shaped part will attach to the bottom of most doors as long as the thickness doesn't exceed 4 cm. The smaller plate goes where the door actually locks on the door frame. To apply this you need to unscrew the cap of the door that is on the side, and then screw the plates back in but with the plate in between. Have the chamfered edges face in towards the door so it doesn't stick out as much. This will make sure that the door lock can't do what it is supposed to making this a minimal touch door.

Please consider me as a candidate for the prize as I don't have a printer, and have been wanting one for quite a while.