Chain Link Fidget (Print-In-Place)
Description
PDFPrint-in-place chain link fidget toy - available in 4 sizes.
- Small (8 Links) - Ideal for one-handed use
- Medium (12 Links) - Good middle ground, useable in one or two hands (Recommended)
- Large (16 Links) - Great for use with two hands
- XL (40 Links) - No real purpose, just for fun!
You can roll, twist, curl the chain inside your hand(s) and make interesting shapes. For Medium and Large sizes, place it on two fingers and rotate the chain around, as if you were twiddling your thumbs.
The 3 smallest sizes are quick prints. The small and medium sizes will print in under an hour, the large size takes less than an hour and a half.
You can view the rest of my fidget toys in this collection, including my original chain link fidget.
No special settings are required for these models. However, the joints may need broken in, depending on the accuracy of your printer.
The filaments used in the pictures above:
Small - polymaker PolyTerra Marble PLA
Small - Fillamentum Wizard's Voodoo PLA
Medium - Inland Blue Tough PLA
Large - polymaker PolyTerra Army Red PLA
Large - Inland Yellow Tough PLA
XL - Fillamentum Lilac PLA
Tags
Model origin
The author marked this model as their own original creation.
