Flex3Drive G5 mount for Sapphire-S printer

Custom made mount plate to fit the stock hot-end in the twotrees Sapphire-S 3D printer and allow a Flex3Drive extruder to connect to it.

The cut-out lip is needed to accommodate this hot-end mount

Print Settings

Printer:

E3D BigBox

Rafts:

No

Supports:

No

Resolution:

0.2

Infill:

50%

Filament:

Black Post-Printing =============

I used metal inserts pressed into the plate to bolt into. Use a thin-tipped soldering iron set to a low temperature (180C) to press the inserts down into the deep holes.

How I Designed This

Fusion 360