Another Ikea LACK ENCLOSURE (with MDF)

This is my take on a enclosure for my printer.

I wanted something that was easy to assemble and disassemble.

This build has support for screws and nuts to attach the walls but you

can also you 2 pair of 10mm magnets.

I have taken inspiration of several mods for the LACK ENCLOSURE.

Started with trying to edit the STL/Mesh files but didn't like so I redid all parts. https://a360.co/2IAvkou

All parts even the walls is included as STL file

The MDF I'm using is 12mm but thinner can be used with easy, just ad washer

Components not printed are:

Ikea LACK table

MDF 12mm ( or thinner)

Wood screw: 3x16 mm

Wood screw 6x80 mm

Magnets 10x3 mm

Going to add lights and extra sound absorbent on the inside.

I'll update with more photos when it's done

Print Settings

Printer Brand:

Wanhao

Printer:

Wanhao Duplicator i3 V2

Rafts:

No

Supports:

No

Resolution:

0.2

Infill:

12

Filament: Clasohlson PLA Gray

Notes:

I printed with 80mm/s and 0,32 layer and worked fine.