Diffuser that snugly fit over a 8x8 LED floodlight making the light much more evenly distributed.
No glue required.
The walls are 1.2mm, the flat surface is 0.48mm thick, enough for 2 layers of 0.24mm
The inside dimension is a square with 79.5mm sides and a 10mm radius fillet in the corners.
Printed with transparent PETG on a textured bed-surface to maximize diffusion. Printed without any parts cooling to maximize layer adhesion.
Used mine on a Parkside 20v battery powered floodlight model.
Made in Onshape, (link to customize).
Made to use together with this design on Thingiverse.
The author marked this model as their own original creation.