LEGO A-Wing Vertical Wall Mount (2020 UCS - 75275)

Wall mount for the LEGO UCS A-Wing Starfighter (75275). Square peg fits into the hole intended for the stand, and lego studs add a little extra stability. Holds the model vertically at a slight angle so that fins and nose clear the wall.

Updated 5/15 with some slight refinements. I have some additional ideas to improve the design and will plan on uploading them if/when I get a chance to implement them.

Link to the matching X-Wing version also pictured

Change Log

• 5/15/23 - Added v2
  • Reduced the overall size for much faster printing
  • Added countersink to the back to accomodate drywall anchors
  • Improved the positioning/fit of the Lego studs
• 5/16/23 - Added v3
  • Widened the bottom screw hole slightly so the mount can be leveled when your holes don't line up perfectly.
• 5/19/23 - Added version with minifig stand
  • This one has a small arm with two studs that displays the included minifig next to the A-Wing.