4020 Turbine Fan

A basic 40x20 Fan. I wanted to print a fan using clear PETG. You will need to remove the plastic tube in the middle of the stator that holds the bearings with a dremel tool and press fit it into the printed fan body with a little added super glue. The tube is to thin to print. You will need to adjust the hole size in the fan body to fit the bearing tube in the particular fan your working with. I used a WINSINN fan removed the brass spacer and replaced it with bearings.

EDIT: Changed the outer body angle 12/17/19

Print instructions

Category: 3D Printer Accessories