Raspberry Pi IR Camera Back Enclosure with Cutouts

The original design did not include cutouts on the back for the screws that mount the IR modules to the camera. This required the user to bend the front faceplate around the camera to get it to screw down.

To fix that, I created 2 models. 1 model is slightly larger than the original to accommodate the screws. The other model contains cutouts for the screws so it will sit flush.

Print Settings

Printer:

FLSUN Super Racer

Rafts:

No

Supports:

No

Resolution:

.20

Infill:

15%

Filament:

White