Analog Module Bay Mount quick release for V2 + V3 Adapter on DJI Goggles

Update 2022-05-12: Design tweaked for the V3 again after some feedback from folks. Personally tested on both Rapidfire + TBS Fusion modules!

Update 2022-04-02: MAJOR DESIGN UPDATE! V3 adapter has been overhauled to successfully fit other analog modules like the TBS Fusion. Tested and working great with the Fusion and the RapidFire!

Update 2022-03-15: Now redesigned for the V3 adapter PCB! I bought one just to model for y'all, strangers on the internet.

Modular quick release module bay for your DJI FPV Goggles. For the V2 Adapter Board (like this on RDQ) and the V3 (like on pyrodrone).

Works with Rapidfire module, TBS Fusion, etc– any standard fatshark module.

Except. As of 2022-02-26 I haven't tested it with the TBS Fusion yet. If you've got one please send me a discord/telegram ! I want to make sure it's 100% perfect like it is with the rapidfire

Parts list and how to print

Print as-orientated:

1. V2/V3-adapter body: Biggest part, holds the module. Needs support but only on the bottom.
   • Two fit options: std and tight. I prefer tight on my RapidFire since I never need to remove it.
2. detach mount A goggle: Bolts to the goggles goggle strap bolts using the stock bolts. No support but needs brim. 
3. detach mount B adapter: Clips then screws into the module adapter PCB. Print with no support but needs brim. Comes in 0.3mm clearance and 0.2mm clearance. If 0.2 is too tight try 0.3!

• Optional: Don't want the quick release option? Print bolt-together mount instead of the A + B parts.

Other hardware:

• 2 small wood screws that come with the v2 adapter. Works fine with one, and other screws will work fine.

Material: PLA, PET-G, HT-PLA+!

Prints great inrigid plastic. PLA, PET-G, or my favorite HT-PLA+.

Post your makes!

Please post 'em! Really! Take a cameraphone photo of your print in all its glory and show it off! Plus it really helps get this design out there to the world.

Message me on discord/telegram for

• customizations
• different engravings
• different variation ideas
• any issues: printing, design, fit, etc
• to show off / geek out about your result
• say howdy

Designing stuff is fun but interacting with cool people and hearing about their adventures is better. I can generate any variation / engraving easily, message me on discord/telegram and/or leave a comment and let's make your perfect version. I only ask that you post a make!

If you'd like the CAD or STEP file too, no problem. I've already helped a bunch of great folks! Send me a ping