La pièce verte est le vrai bouton, c'est lui qui doit être monté sur le vêtement. Il inclut un aimant Ø4x2mm. Le G-code à une pause à Z2.80 pour pouvoir l'incruster.
Pour la pokeball, il y a la base et les 2 hémisphères. Pour la base, il faut commence l'impression en noir et au moment du changement de filament en blanc, il faut aussi y inclure l'aimant Ø4x2mm. Les hémisphères sont 2 fois la même pièce, il y a une rouge et une blanche. Un peu de colle suffit pour les faire tenir.
Des mises à jour seront à venir 😉
The green part is the real button, this is what must be mounted on the garment. It includes a magnet Ø4x2mm. The G-code has a pause at Z2.80 to be able to key it.
For the pokeball, there is the base and the 2 hemispheres. For the base, you have to start printing in black and when changing the filament to white, you must also include the magnet Ø4x2mm. The hemispheres are twice the same part, there is a red and a white. A little glue is enough to hold them together.
Updates will be coming 😉
The author hasn't provided the model origin yet.