Customizable Filament Swatch Remix Collection

A collection of the filament swatches I have printed to go along with my 3D Benchys. I use these as colour, quality and finish samples when selecting filament for a new print. I will continually update this 'thing' with the swatches I create for my filaments, both the stl and an image of the print. 

Remixed from makkuro's great customizable version using OpenSCAD. 

You can check out more information about my 3d printing journey here: wigglememore3d.com. 

All have been printed using the recommended settings: 

• Layer height 0.2mm
• 2 perimeters
• 4 bottom layers and 5 top layers
• 20% grid infill
• My Temperatures:
  • PLA+ 208/65
  • PETG 240/70 (+magigoo)
• My Speeds (mm/s) and Accelerations (mm/s^2):
  • PLA+ 150 print with 120 walls, 250 travel and 40 initial layer; 1800 print acceleration and 2400 travel
  • PETG 150 print with 120 walls, 200 travel and 25 initial layer; 1600 print and travel acceleration
• My Fan:
  • PLA+ 100% from layer 3
  • PETG 35% from layer 3