For when you have lots of enemies of the same type: Clear and simple numbering.
10
64
0
592
updated June 28, 2024

Description

PDF

For when you have lots of enemies of the same type: Clear and simple numbering.
They are made to be printed at 0.2mm layer height, with the three top layers being only the numbers, so you can do a filament swap to a different color.
For the numbers to print, you can't use a nozzle bigger than 0.4mm.
They can attach to the minis with something like sticky tack or a reusable glue like Glue Dots or similar.
My reasoning for this is that they would fit most base sizes in the 25mm range (as they tend not to be 100% consistent).
The circle in the middle of the design is to make room for whatever you want to use to stick the bases in places, and not to fit the miniature bases themselves.

They are designed in Fusion 360, and I have attached the source files for anyone that wants to make tweaks.
1-9 are the same design, and 10-20 are slightly different, to make better use of space.
1-10 are available for Large creatures.
The font I used is Eczar.

Tags



Model origin

The author marked this model as their own original creation. Imported from Thingiverse.

License